Certification IntroductionThe full name of NCC is the National Communications Commission. It is the Taiwan Communications and Communications Commission, established for the development of communications and communications in Taiwan. It is mainly responsible for frequency management, radio wave detection, network domain names and website addresses, and related international exchanges and cooperation. The circulation and use of communication and information equipment in the Taiwan market must be certified by Taiwan NCC.Taiwan NCC certification basic information is mandatory: Mandatory test content: RF Whether factory inspection: No Local test: Yes Local representative: Yes Certificate validity period: 5 yearsVoltage: 110VacCertification period: 4-5 weeksCertification labelTaiwan NCC certification inspection qualified label style Taiwan NCC certification label style CC: It is a fixed code to distinguish the types of equipment imported for customs declaration. XX: Table verification authority (organization): expressed in English letters. xx: table year: AD 2007 with 07, 2008 with 08...and so on. YY: Table equipment type. yyy: table serial number: increase sequentially from 001-999 in each year. Z: table serial number z: table verification method W: inspection code NCC certification label style instructions 1. It should be labeled or printed on the position of the equipment body in an appropriate proportion. There is no maximum/minimum size regulation, and the principle is clear. 2. This NCC certification mark, together with the inspection pass number, should be attached to the product according to the regulations.Applicable product scopeTaiwan NCC certified product scope1. Public switched telephone network equipment (PSTN) wired telephones (including VOIP network telephones), automatic alarm equipment, telephone tape recorders, fax machines, teletypewriters, remote control devices, wired telephone wireless main and auxiliary machines, user-prepared private exchanges, Key telephone system, computer telephone integration equipment, data equipment (ADSL terminal equipment and splitter), incoming call display terminal equipment, 2.4GHz radio frequency telecommunication terminal equipment, DS1/T1/E1 terminal equipment, etc. 2. Land mobile communication network equipment (PLMN) radio calling system terminal equipment, mobile data terminal equipment, relay wireless telephone, GSM mobile phone and terminal equipment, DCS1800 mobile phone and terminal equipment, the third generation, Fourth-generation mobile communication terminal equipment (the third-generation mobile communication (3G) business license will expire on December 31, 2018 according to law). 3. Integrated Service Digital Network (ISDN) ISDN digital telephone, ISDN personal computer add-on card, ISDN G4 fax machine, ISDN video telephone, ISDN terminal adapter, ISDN terminal adapter module, ISDN PABX, other ISDN user terminals equipment, etc. Low Power RF Motor Products Wireless Network (WLAN) Products (including IEEE 802.11a/b/g/n), UMII, Bluetooth Products, RFID (125kHz~134kHz, 13.56MHz, 27MHz, 922MHz~928MHz, 2.4GHz, 5.8GHz) , ZigBee, wireless keyboard, wireless mouse, wireless headset microphone, radio walkie-talkie, radio remote control toys, all kinds of radio remote controls, all kinds of wireless anti-theft devices, Family Radio Service (FRS), etc.application process1. The entrusting party provides product information to ITL to evaluate the quotation; 2. The entrusting party confirms the quotation, fills in the application form, provides samples and materials, arranges the payment (the first one), and the institution opens the case; 3. Arrange product forecast, 4. If there are problems in the test and data, arrange for rectification and re-test until it is qualified; 5. After the test and data are qualified, the certification agency will conduct a witness test; 6. After the witness test is completed, the certification agency will issue a test report , concurrently certified;7. The entrusting party pays the payment (the balance), gets the certificate report, and closes the case. Note: NCC certification does not accept foreign test reports and certificates. Before the applicant has assigned a local agent, the foreign manufacturer can temporarily serve as the holder of the certification. However, if you want to handle and complete the business of imported products, you still need local agents in the end.Application documents1. Application form; 2. Test report of test sample; 3. Instruction manual or operation guide in Chinese or English; 4. Specification in Chinese or English; 5. Circuit diagram or block diagram; 6. Registration certificate of profit-making enterprise; 7. In addition, foreign manufacturers need to provide legal company establishment certificate and telecommunications control radio frequency equipment business license.Certification feeTelecommunication terminal equipment NCC certification fee standard 1. Verification fee Verification fee is different according to different uses (commercial and self-use). 2. License fee The license fee includes the certification certificate fee and the declaration of conformity certificate fee. Low-power RF motor NCC certification fee standard 1. Verification fee Verification fee is different according to different uses (commercial and self-use). 2. License fee The license fee includes: type certification certificate fee, verification certificate fee and conformity declaration certificate fee.
Certification IntroductionTaiwan BSMI certification "Inspection Standard for Electrical Safety Specifications for Information Products" CNS14336-1 (version 99) has been implemented since January 1, 2012, while the previous version of Taiwan BSMI certification CNS 14336 (version 2005) will no longer apply from the same date. Taiwan BSMI certification CNS13438 (full version in 1995) was announced on August 16, 2010, and the "Inspection Standard CNS 13438 "Information Technology Equipment - Radio Frequency Interference Characteristics - Limit Values and Measurement Methods" was added. BSMI is the abbreviation of "Bureau of Standards, Metrology and Inspection" in English by the Bureau of Standards and Inspection of the Ministry of Economic Affairs of Taiwan. Taiwan voltage: single-phase 110V/220, three-phase 220V, frequency 60Hz.Taiwan BSMI certification basic information is mandatory: Mandatory test content: Safety and EMC Whether factory inspection is required: No Local test: Yes Local representative: Yes Certificate validity: 5 years (verification registration), 3 years (certification registration) Voltage: 110Vac Application period: Usually 3-5 weeksCertification ModeBSMI certification in Taiwan, China is mandatory and requires both EMC and SAFETY. However, BSMI currently does not have factory inspections, but must act in accordance with the regulations of the Bureau of Standards. Therefore, the certification model of BSMI is: product inspection + registration supervision. BSMI application method type approval: 1.EMC type approval (replacing the original EMC application), which will be enforced from November 1, 2002. Applicable products: 61 electrical and electronic products only have EMI requirements, and 124 electrical and electronic products only require EMI + safety report (if the product has safety requirements). Applicable standards: EMI only. The documents that need to be provided are (application for electromagnetic compatibility type approval, test report, technical documents: photos, labels, parts with electromagnetic compatibility, block diagram and user manual). 2. Type approval (EMC+Safety), since January 1, 2004, 178 kinds of electrical and electronic products need to apply for this kind of approval. Applicable standards: EMC+Safety, the documents to be provided are (application for product type approval, company or factory license, test report, technical documents for electromagnetic compatibility: photos, labels, parts with electromagnetic interference, block diagrams and user manuals and technical documents of safety regulations). Certificate validity: three years, can be extended once. BSMI certification registration enforcement date: not yet announced, applicable standards: EMI + safety regulations. The documents to be provided are (application for product type approval, company or factory license, test report, technical documents for electromagnetic compatibility: photos, labels, parts with electromagnetic interference, block diagrams and manuals, and safety regulations documents, Declaration of Conformity). Certificate validity: three years, can be extended once BSMI certification compliance declaration date of enforcement: January 18, 2002. Applicable products: 19 components of information technology equipment. Applicable standard: CNS13438 (ONLY EMC). The documents to be provided are (Declaration of Conformity, Test Report, Technical Documents: Photos, Labels, Parts with Electromagnetic Interference, Block Diagram and User Manual). No certificate. For electronic and electrical products, the three application methods provided by the Bureau of Standards are characterized as follows: the declaration of conformity is only applicable to parts of some information technology equipment (please refer to the product description on the website of the Bureau of Standards and Inspection, and the product cost is at the discretion of the manufacturer to apply for certification or registration or Type approval. The difference between certification registration and type approval is: inspection method: if the product has obtained type approval, the inspection of customers will be simplified. For products applying for certification and registration, customers will not be inspected, but random market tests will be adopted.Applicable product scopeIf your product falls within the following scope, you need to apply for verification to expand the domestic market: 1. Compulsory Commodity Inspection Mark (CI MARK): electrical products (such as home appliances), electronic products (such as information equipment and Entertainment audio-visual equipment products), mechanical products (such as power tools and equipment), chemical products (such as tires and toys). 2. Voluntary orthographic marking (CNS MARK): Industrial products, building materials, wires, home appliances, automobile and motorcycle parts, industrial raw materials, or those with orthographic markings on competitors' products.3. Voluntary Product Verification Mark (VPC MARK): Important safety components, digital set-top boxes, lamp sockets, battery chargers, restricted hazardous substances, lithium batteries, vehicle electromagnetic compatibility, sports and fitness equipment, etc.application process1. Fill in the application 2. Test samples 3. Issue a report 4. Report evaluation 5. Issue a certificateApplication documents1. Application 2. Copy of applicant's certificate 3. Relevant technical documents (product circuit diagram, Layout, Label, Chinese manual, transformer specification, inductance specification, product appearance dimension drawing, parts list)
Certification IntroductionThe National Recommended ROHS certification is a certification promoted by the state in order to control and reduce the environmental pollution caused by the waste of electronic information products. The purpose of the country's ROHS certification is to reduce or eliminate 6 substances in electronic information products including lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls and polybrominated diphenyl ethers. The National Recommended ROHS certification system adopts the principles of unified product catalog, unified certification technical specifications, certification rules and conformity assessment procedures, and unified logo.In 2018, the Ministry of Industry and Information Technology, together with the National Development and Reform Commission, the Ministry of Science and Technology and other nine ministries and commissions, compiled the "Management Catalogue for Restricted Use of Hazardous Substances in Electrical and Electronic Products (First Batch)" and the "List of Exceptions to the Application of Restricted Substances in the Catalogue for Compliance Management", requiring that products included in the catalogue, The content of lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls and polybrominated diphenyl ethers shall meet the relevant standards for the restriction of the use of hazardous substances in electrical and electronic products, and be included in the management scope of the management system for the display and use of hazardous substances in electrical and electronic products.National Recommended ROHS will be enforced on November 1, 2019. All products in the "Management Catalogue for Restricted Use of Hazardous Substances in Electrical and Electronic Products (First Batch)" should meet the requirements of National Recommended ROHS regulations.National Recommended ROHS certified laboratory organizationOnly the laboratories authorized by the CNCA to do the National Recommended ROHS certification testing can undertake the inspection work. What are the benefits of enterprises doing National Recommended ROHS certification?Reductions and exemptions for enterprises in the collection of waste electrical and electronic products disposal funds;Prioritize inclusion in government procurement plans;Enhance the competitiveness of products in the market.Authentication modeChina National Recommended ROHS certification modelMode 1: Type test + post-certification supervision [applicable to components, component products, and material products]Mode 2: Sampling test + post-certification supervision [applicable components and component products]Mode 3: Optimization test + post-certification supervision [applicable to complete machine products and component products]Mode 4: Sampling test + initial factory inspection + post-certification supervision [all products within the scope of applicable rules] Applicable product scopeThe first batch (12 categories) of compulsory products of China's ROHS: refrigerators, air conditioners, washing machines, electric water heaters, printers, copiers, fax machines, televisions, monitors (including monitors, display screens, etc.), microcomputers (including Desktop computers, notebooks, tablet computers and other PCs), mobile communication handsets, and telephone stand-alones.The National Recommended ROHS certificate covering 12 types of products is valid for 5 years, and needs to be subject to regular supervision and random inspection every year.application process1. Certification application 2. Certification acceptance 3. Document review 4. Sample testing 5. Factory inspection (only mode 4 requires factory inspection) 6. Conformity assessment 7. Certification fees 8. Certificate issuance
Certification IntroductionCQC mark certification is one of the voluntary product certification businesses carried out by China Quality Certification Center. The CQC mark is applied to indicate that the product meets the relevant quality, safety, performance, electromagnetic compatibility and other certification requirements. The scope of certification is designed for mechanical equipment, electrical equipment, electrical appliances, electronic products, textiles, building materials and more than 500 kinds of products. CQC logo certification focuses on indicators such as safety, electromagnetic compatibility, performance, and hazardous substance lines that directly reflect product quality and affect consumers' personal and property safety. It aims to safeguard consumers' interests, promote product quality, and enhance domestic enterprises. force.Certification Significance1. The certification certificate has a high gold content and is synchronized with international certification: the technical requirements of enterprises that have obtained CQC product certification are synchronized with the international equivalent product certification, which greatly improves the gold content of the product certification certificate; 2. The certification certificate and domestic compulsory product certification Synchronization: When the relevant CQC certified products stipulated by the state are included in the CCC compulsory certification products, under the premise of ensuring product consistency, there is no need to re-test and certification, and the CQC certificate can be directly converted to the 3C certificate; 3. Establish a brand and improve Market competitiveness: Obtaining CQC product certification means that the product safety has been guaranteed by the brand. In the current situation of uneven production enterprises, it is conducive to improving the popularity and competitiveness of the certified product brand, obtaining a green pass to enter the market, and improving the market. 4. Reduce product cost: CQC product certification has been widely recognized and accepted by relevant departments and institutions in various fields. After the enterprise obtains the mark certification, it can greatly reduce duplication. Testing and repeated certification reduce production and operation costs, and at the same time reduce product risks that companies need to take.Applicable product scope001 Electronic products and components002 Household electrical accessories003 Electrical accessories004 Lighting electrical accessories005 Power tools and accessories006 Small and medium motors and accessories008 Household appliances009 Commercial machinery010 Lighting electrical appliances011 Wires and cables012 Low voltage electrical appliances013 Auto parts014 Motorcycles Parts015 Tire016 Glass017 Power system relay protection and automation device019 Energy meter020 Low-voltage complete equipment and accessories021 High-voltage equipment and electrical appliances024 Photovoltaic (PV) and power storage products025 Motor vehicle products027 Experimental measurement and control Instruments and equipment028 Earth-moving machinery and its parts029 Electric vehicle conductive charging connection device charging030 Wind energy products031 Home photovoltaic and solar thermal products034 Health products036 Food contact product safety certification implementation rules038 Bicycle parts039 Unmanned aerial vehicle040 Explosion-proof electrical Products 103 Textiles 108 Construction products 109 Sanitary ware 110 Cement products 113 Toys 116 Machinery products 118 Electronic bidding system 123 Lightning protection products 125 Audio and video products (performance) 127 Electric vehicle charging facilities (Charging Alliance logo) 129 Bearing products 130 "Restricted use of toxic products" "Hazardous Substances" Certification ROHS 134 Non-metallic Materials and Parts Performance Mark Certification 138 Student Supplies 140 Restricted Use of Polycyclic Aromatic Hydrocarbons (PAHs) Certification 142 Batteries and Batteries 161 Beidou Internet of Vehiclesapplication process1. Application acceptance 2. Data review 3. Sample receipt 4. Sample testing 5. Factory review 6. Conformity assessment 7. Certificate approval 8. Certificate printing, collection, delivery and managementApplication materials1. Product manual; 2. Product specification; 3. Product maintenance manual; 4. Product circuit diagram (including schematic diagram and printed circuit board diagram); 5. A description of the difference between the main delivery model product and the covered model product in the unified application unit；6. A list of key components related to safety of the product and a list of main parts and components that have an impact on electromagnetic compatibility; 7. A copy of the certification certificate for key safety components of the product; 8. The CB test certificate and report of the product (if any) 9. The product's trademark authorization letter (if any).
Significance of CCC The necessity of CCC certification 1. CCC certification is a compulsory certification and a pass to enter the domestic market; CCC is a domestic compulsory certification. If it is sold in China, it mainly depends on whether the product is in the CCC compulsory scope. If so, you must do CCC certification. Enterprises with CCC certification can improve the recognition of enterprise products. If the product is exported, there is a CCC certification mark, which can reduce some items of export inspection. 2. Products and enterprises with CCC certification are easy to be recognized, enhance customer confidence, shape corporate image and increase popularity. It is not easy to buy products without CCC certification. 3. Since CCC certification is a third-party testing agency independent of the first party (supplier) and the second party (purchaser), through strict inspection and inspection, it is a part of issuing authoritative certificates for the compliance of products. A fair and scientific quality system, in line with the laws of the market economy, can bring direct economic benefits to both sides of the trade. 4. The CCC certification and CCC certification mark obtained by the enterprise are an important manifestation of corporate culture and quality culture. Striving for the CCC certification mark and producing high-quality products are not only material achievements, but also spiritual products and the crystallization of corporate culture.Compulsory Product Certification Catalog01 Electric wires and cables 02 Circuit switches and electrical devices for protection or connection 07 Household and similar equipment 08 Electronic products and safety accessories (formerly 08, 09, 16) 10 Lighting equipment 11 Vehicles and safety accessories (formerly 11, 12) 19 Safety protection products 21 Building materials products (formerly 13 and 21 categories) 22 Children's products 23 Explosion-proof electrical appliances 24 Household gas appliancesapplication process1. Application acceptance 2. Data review 3. Sample delivery 4. Sample testing 5. Factory inspection 6. Conformity assessment 7. Certificate approval8. Printing, receiving, sending and managing certificatesThe frequency of supervision (annual review) after obtaining the certificate: generally once a year, and once every six months for toy categories.Application materials1. Product manual; 2. Product specification; 3. Product maintenance manual; 4. Product circuit diagram (including schematic diagram and printed circuit board diagram); 5. Description of the difference between the main delivery model product and the covered model product in the same application unit;6. A detailed list of the key components related to product safety and a detailed list of the main components that have an impact on electromagnetic compatibility; 7. A copy of the certification certificate of the key safety components of the product; 8. The CB test certificate and report of the product; 9. The product trademark license, etc.others· Certification processing lead-time The CCC certification processing lead time generally takes about 2 months. · Certificate validity period CCC certification certificate is valid for five years. During the validity period of the five-year certificate, as long as the manufacturer accepts the annual factory inspection (annual audit) every year. · CCC derivation CCC derivation is to meet the needs of independent CCC certificates for manufacturers' distributors or partners. The cost of derivation of sub-certificates is low, the processing time is only 2-3 weeks, and the cost is greatly saved, and there is no need to re-test and audit the factory. Note: The factory information on the certificate cannot be changed, the main certificate is suspended or cancelled, and the secondary certificate will also be invalid. · Application for CCC certification of imported products If the goods are in the CCC certification scope and are used for commercial purposes in sales or profit-making activities, CCC certification is required. For civilian purposes, such as scientific research, exhibition, teaching, samples, etc., you can apply for exemption from CCC certification. Since CCC certification requires factory inspection, the cost of CCC certification for imported products will be much higher.
