Certification IntroductionVCCI is Japan's electromagnetic compatibility certification mark, managed by the Voluntary Control Council for Interference by Information Technology Equipment. VCCI certification is optional, but information technology products sold in Japan are generally required to undergo VCCI certification. Manufacturers should first apply to become a member of VCCI before they can use the VCCI logo. In order to be accredited by VCCI, the provided EMI test report must be issued by a VCCI-registered accredited testing agency. Japan does not currently have standards for immunity. The need for VCCI certificationAlthough VCCI certification is optional, it is used by many companies to prove the quality of products. Therefore, VCCO certification is only theoretically "voluntary", and market pressure makes it practical. basic information of VCCI certification is mandatory: voluntary certification validity period: no validity period factory inspection requirements: no requirements certificate holder requirements: no requirementsApplication period: 1-2 weeks Technical information: Voltage frequency AC 100V/200V, 50Hz/60Hz, plug JIS 8303 Applicable product scopeVCCI certification is a voluntary certification, and the applicable products are IT information technology equipment. Not all electrical and electronic products are suitable for VCCI certification.A product's Class A label must show that the product complies with RF radiation provisions, and a Class B product must only display the basic VCCI symbol. 1. Class A equipment: must meet the limit requirements of Class A. ITE equipment other than Class B. 2. Class B equipment means that it must meet the limit requirements of Class B, and it is intended for use in a home environment (home environment refers to an environment where it is possible to use radio and television receivers within 10m away from information technology equipment, or can Products used in a residential environment), including: equipment used in no fixed location, such as portable equipment powered by rechargeable batteries; communication terminal equipment powered by communication networks; personal computers and portable word processors and peripherals connected to them equipment; facsimile equipment.

Certification IntroductionThe Korean Ministry of Knowledge Economy (MKE) announced on August 25, 2008 that the Korean National Standards Committee will implement a new national unified logo, the "KC" logo, from July 2009 to December 2010. The "KC" logo means "Korea Certification". KC certification is the safety certification system for electrical and electronic appliances in South Korea. Compulsory safety certification system implemented on January 1, 2009. In order to avoid duplication of certification, from July 1, 2012, EMC and Safety have been separated and managed. All electrical and electronic products that apply for Korean certification must obtain KC certificate and KCC respectively for their safety (Safety) and electromagnetic compatibility (EMC) requirements. Certificate (new MSIP). There are two certification bodies for KC certification: Korea Electrical and Electronic Testing Institute (KTC, Korea Testing Certification) and Korea Electrical Testing Institute (KTL, Korea Electrical Testing Institute). These two are not only the certification bodies of KC, but also the qualification testing laboratories. In terms of safety standards, all products entering the Korean market need to comply with the Korean safety standard K standard (similar to the IEC standard). When using the IEC standard, it must meet the requirements of South Korea. The national differences can be found in the announcement in the CB system of IECEE. In terms of EMC, the Korean EMI standard is similar to the CISPR standard, and the EMS standard is similar to the EN standard. Certification system classificationSouth Korea's KC certification is divided into " KC Safety ", "KC EMC and RF" and "MEPS" (1) KC Safety has implemented a safety management system for electrical appliances in order to prevent consumer safety accidents such as electric shock and fire. Only products that have been confirmed Only allowed to leave the factory and sell. The latest "Electrical Appliances Safety Management Law" requires that KC Safety certification is divided into three categories according to the different hazard levels of products: · Compulsory Safety Certification (Safety Certification) · Self-regulatory Safety Confirmation (Self-regulatory Safety Confirmation)· Supplier Self-Dclaration (SDoC) Validity period of certificate: 1. Compulsory safety certification - none, annual review maintains validity (the template below) 2. Self-discipline safety confirmation - 5 years 3. Suppliers’self-declaration - none Certificates, declarations are permanently valid Factory inspection requirements: Compulsory safety certification requires the first factory inspection and annual audit Requirements for certificate holders: Compulsory safety certification must be a factory certificate, and the other two types of certification are available for factories/manufacturers/importers Licensed. (2) Electromagnetic Compatibility & RF Certification ( KC EMC and RF )Ensure that the device should be able to work normally in a certain electromagnetic environment, that is, the device should have a certain electromagnetic immunity (EMS); secondly, the electromagnetic disturbance generated by the device itself cannot have an excessive impact on other electronic products, that is, electromagnetic interference. disturbance (EMI).KC EMC and KC RF certification includes electromagnetic compatibility testing, radio frequency and telecommunication testing. According to the requirements of the latest "Radio Wave Law", the certification system is divided into three categories according to the different levels of products harmful to the radio environment:· Certification of Conformity · Registration of Compatibility · Interim of Conformity (3) Energy Efficiency Rating (MEPS)The energy efficiency rating label is an information label that expresses the performance indicators such as the energy efficiency of the product. Applicable product scopeThe product range of KC certification generally includes electrical products above AC50 volts and below 1000 volts. In addition to products that must obtain safety certification, self-discipline safety confirmation must be applied.(1). Safety certified electrical appliances (item 57)Cables and Cords: 1 item (wires, cables)Switches for Electrical Appliances: 1 Item (Electrical Switches, Electrical Switches)Capacitors & Filters Capacitors & Filters: 1 Item (Capacitors, Power Filters)Installation Accessories and Connection Devices: 1 itemInstallation Protective Equipment: 2 items (miniature fuses and fuse clips, circuit breakers)Household insulation transformer Safety Transformer and Similar Equipment: 2 items (small household transformer, voltage stabilizer)Electrical Appliances for Household and Similar Equipment: 36 items (vacuum cleaners, electric irons, etc.) with rated output power below 10kW, excluding explosion-proof and medical machinery useMotor Tools: (1 item)Audio and video application equipment Audio, Video and Similar Electronic Appliance: 4 items (power supply, copier, UPS, plastic machine)IT and Office Appliances: 18 headings (monitors, printers, projectors, scanners, etc.)11. Lighting equipment Lighting: 4 items (2) Products subject to self-discipline safety confirmation (95 items)Switches for Electrical Appliances: Electrical Control TerminalsHome Insulation Transformer Safety Transformer and Similar Equipment: 2 itemsElectrical Appliances for Household and Similar Equipment: 35 items with rated output power below 10kW, excluding explosion-proof and medical machinery useAudio and video application equipment: 34 items (TV, video player, tuner, etc.)Information technology and office equipment: 18 headings (monitors, printers, projectors, scanners, etc.)11. Lighting equipment Lighting: 5 items otherThe difference between Korea KC certification and KCC certificationKCC is a mandatory certification for IT information, telecommunications and RF radio frequency products in the Korean market, including electromagnetic compatibility testing, telecommunication testing and radio frequency testing. The Korea Broadcasting and Communications Commission authorized the Korea Radio Research Institute (RRA) as the KCC issuing agency. Since January 1, 2011, the original Korean KCC logo will be uniformly converted to KC, so KCC certification and KC certification use the same certification logo, the difference is that the KCC certification logo will have a KCC ID number below it. KC nameplate requirementsThe KC nameplate must include the following: ①KC logo (including certificate number SUxxxxxxxx) ②Product name (must be expressed in Korean) ③Model name ④Voltage frequency ⑤Factory name ⑥Manufacturing country ⑦Double insulation mark "Back" (if necessary) ⑧Production year Month ⑨A/S after-sales service telephone (must be in Korea)u

Certification IntroductionThe full name of Korea KCC is Korea Communication Commission. According to Article 33 of South Korea's "Basic Law of Electrical Communication" and Articles 46 and 57 of "Radio Wave Law", a certification system for broadcasting and communication equipment has been established. The system requires that any production, import or sale of broadcasting and communication equipment certification regulations The products specified in Article 3 should obtain KCC certification in advance.The KCC logo is evolved from the MIC logo. Since the Korea Communications Commission (KCC, Korea Communications Commission) replaced the past Korea Ministry of Information and Communication (MIC, Ministry of Information and Communication), the certification name has been changed accordingly. KCC came into effect on November 11, 2008, and will evolve into the KC logo on January 1, 2011.KCC aims at the electromagnetic compatibility requirements of information products, and controls the certification of wireless transmission and communication products, including electrical communication equipment, radio frequency products, information technology equipment, etc. The KCC mark is a certification mark issued by the Korea Radio Research Agency (RRA). KCC certification mark Certification classificationAccording to the category of the product, KCC is mainly divided into the following three types of certification: 1. Conformity Certification: Wireless communication equipment, such as telephones, regulators, fax machines, etc. 2. Conformity registration: electrical appliances. 3. Interim Certification: For equipment that has no standard temporarily Applicable product scopeIt basically includes all wireless communication products, as well as most electronic and electrical products covered by KC certification. 1. Automatic alarm receivers installed on ships 2. Automatic alarm telephone devices 3. Wireless beacons for emergency position indication 4. Ships with wireless navigation radar and automatic radar tracking equipment 5. Wireless equipment for marine mobile phones 6. Satellite mobile Radio equipment for communications and radio bureaus (only some of them are listed here)

Certification IntroductionBIS certification is a product certification in India, supervised by the Bureau of Indian Standards (BIS). According to different product types, BIS certification is divided into three types, including mandatory ISI mark certification, CRS certification, and voluntary certification. The BIS certification system has existed for more than 50 years, covering more than 1,000 products. All products included in the mandatory list must obtain BIS certification (ISI mark registration certification) before they can be sold in India. BIS is a third-party certification body, and the certified products will be marked with the ISI label. The label has a great influence in India and neighboring countries, and has a good reputation, which is a reliable guarantee for product quality. Once the product is marked with the "ISI mark", it means that it meets the relevant Indian standards, and consumers can buy it with confidence. In order to unify product supervision standards and requirements and ensure product quality and safety, India began to implement a product certification system in 1955. According to the Bureau of Indian Standards Act, 1986 (The BIS Act, 1986), product certification in India implements the principle of voluntary certification, but taking into account factors such as public health and safety and mass consumption, the Indian government issues an immediate decree to implement specific products. Mandatory authentication. Aims to provide end-consumers with quality-assured, safe and reliable products. All products listed in compulsory certification must obtain product certification according to Indian product standards before they can enter the market. Therefore, it is necessary for manufacturers who want to enter the Indian market to understand the product certification system in India. Introduction to Bureau of Indian Standards (BIS)According to the Bureau of Indian Standards Act, 1986 (The BIS Act, 1986), the Bureau of Indian Standards (BIS) is the competent authority for standardization and certification in India, responsible for product certification. It is also the only product certification body in India, officially established in 1987. to replace the Indian Standards Institute established in 1946. The Bureau of Indian Standards (BIS) is subordinate to the Ministry of Consumer Affairs and Public Distribution. Although it is a social corporate body, it exercises government functions. Its main tasks are to formulate and implement national standards; implement conformity assessment systems; represent the country to participate in ISO, IEC and other international Standardized activities. The Bureau of Indian Standards (BIS) is a financially self-sustaining organization with certification revenue as its main source of income. There are 5 regional bureaus and 19 branch bureaus under BIS. The regional bureau supervises the corresponding branch. Eight laboratories and some independent laboratories belonging to BIS are responsible for the inspection of samples taken during the product certification process. These laboratories are implemented in accordance with ISO/IEC17025:1999. Certification Considerations1. BIS certification is valid for 1 year, and applicants are required to pay an annual fee. You can apply for an extension before the expiration of the period. In this case, you need to submit an extension application and pay the application fee and annual fee.2. BIS accepts CB reports issued by valid institutions.3. Certification will be faster if the applicant meets the following conditions.a. Fill in the factory address of the factory in the application formb. The factory has testing equipment that meets relevant Indian standardsc. The product officially complies with the relevant Indian standard requirements Certification classificationCurrently BIS certification is divided into three categories:1. Mandatory ISI mark type certification (product test + initial factory inspection + post-certification supervision), mainly including cement, food, automobile parts, steel products and other categories;2. BIS Compulsory Registration System (CRS) (product testing + post-certification supervision), mainly including tablet computers, microwave ovens, wireless keyboards, printer power adapters, LED lights, lithium batteries, mobile power, mobile phones and smart card readers, Uninterruptible power supply/inverter of ≤10kVA, rear projection/LCD/LED TV of 32 inches and below, etc.;3. The rest are BIS voluntary certification, and products other than compulsory mark certification and registration certification can be applied for. Applicable product scopeMore than 10,000 product certification certificates have been issued, and manufacturers are allowed to add labels after obtaining the certificates. The certification scope covers almost every industrial field such as agricultural products, textiles, and electronics.Compulsory certification product list:The first batch (MANDATORY)Certification field BIS certification is applicable to manufacturers in any country. The main certification fields are:1. Tires; 2. Electric irons, kettles, electric stoves, heaters and other household appliances; 3. Cement and concrete; 4. Circuit breakers; 5. Steel; 6. Electric energy meters; 7. Auto parts; 8. Food, milk powder ; 9. Baby bottle; 10. Tungsten lamp; 11. Oil pressure furnace; 12. Large transformer; 13. Plug; 14. Medium and high voltage wire and cable; 15. Self-ballasted bulb. (mandatory in batches since 1986) Second batch (COMPULSORY)There are mandatory registration products for electronic information technology equipment, including:1. Set-top box; 2. Portable computer; 3. Notebook; 4. Tablet computer; 5. Monitor with a screen size of 32 inches and above; 6. Video monitor; 7. Printer, plotter, scanner; 8. Wireless keyboard 9. Answering machine; 10. Automatic data processor; 11. Microwave oven; 12. Projector; 13. Electronic clock with mains power supply; 14. Power amplifier; 15. Electronic music system (from March 2013 onwards) mandatory) The second batch of new additions (COMPULSORY)16. IT equipment power adapter; 17. AV equipment power adapter; 18. UPS (uninterruptible power supply); 19. DC or AC LED modules; 20. Batteries; 21. Self-ballasted LED lights; 22. LED lamps; 23 24. Cash register; 25. Sales terminal equipment; 26. Copier; 27. Smart card reader; 28. Postal processing machine, automatic stamping machine; 29. Pass reader; (Mandatory from November 2014)

Certification IntroductionIndia WPC (Wireless Planning & Coordination Wing) is an agency that controls wireless regulations in India. All wireless products must be approved by WPC before entering the market. There are two types of frequency bands in India: free and open. For free and open frequency bands, such devices only need to apply for an ETA (equipment type approval) certificate; for other frequency bands that are not free, you need to apply for a license. Both the ETA and the license holder must be a locally registered company. Based on CE R&TTE or FCC ID (Indian local standard), 2G/3G/4G requires mobile operators to apply. Basic information of WPC certification· Compulsory certification · No factory inspection required · Sample test required, or no sample required if CE RF report can be provided · No local test required · Local representative requiredSpecifically, any wireless transmission less than 3000 Ghz that does not use human control is considered "wireless communication" as defined by the WPC. These frequency bands are under the control of WPC. That is, wireless transmissions (such as infrared) with frequencies above 3000 Ghz are not considered "wireless communications". WPC certification does not control these frequency bands. Since India has two types of free and unopened frequency bands, for wireless communication products whose frequency bands and output power fall within the control range, it is necessary to apply for an ETA certificate from WPC. In addition, the holders of ETAs must be locally registered companies. In addition, WPC accepts RF report from CE report to WPC certification, no need to provide samples and tests. All wireless devices operating in approved frequency bands. The following frequency bands are free: 1, 2.40 to 2.4835 GHz 2, 5.15 to 5.350 GHz 3, 5.725 to 5.825 GHz 4, 5.825 to 5.875 GHz 5, 402 to 405 MHz 6, 865 to 867 MHz 7, 26.957-27.283 MHz 8, 335 MHz for remote control of crane 9, 20 to 200 KHz. 10, 13.56 MHz 11, 433 to 434 MHz WPC certification requirementsThe wireless certification of wireless products in India can be divided into two modes: ETA (Equipment Type of Approval) certification and License. For free and open frequency bands such as 13.56 MHz, 433MHz, 2.4GHz, 5.725-5.825 GHz, etc., you need to apply for ETA certification; if the device uses other non-free and open frequency bands, such as GSM, WCDMA mobile phones, etc., you need to apply for a license. For ETA certification, India recognizes European standards, and WPC signs the certificate by means of an audit report. For the License, it needs to meet the standard requirements of India. For ETA application, the product does not need to be sent to India for local testing, and the product can submit an application for accreditation to WPC with an R&TTE report. Applicable product scopeEquipment with radio transmitters. These include mobile (GSM or WCDMA) handsets, wireless local area network (WLAN) devices such as Wi-Fi devices, Bluetooth devices, Zigbee devices, WiMAX devices, RFID devices, contactless smart card readers, and in combination with some other RF transmitters device products. Also only receivers do not require a WPC certificate, such as GPS products. Certification CategoryETA (Equipment Type of Approval) certification: free and open frequency bands such as 13.56 MHz, 433MHz, 2.4GHz, 5.725-5.825 GHz, etc. License: non-free and open frequency bands, such as GSM, WCDMA mobile phones. For ETA certification, India recognizes European standards, and WPC signs the certificate by means of an audit report. For the License, it needs to meet the standard requirements of India. For ETA application, the product does not need to be sent to India for local testing, and the product can submit an application for accreditation to WPC with an R&TTE report.

Certification IntroductionThe "Compulsory Testing and Certification Decree for Telecommunications Equipment" issued by the TEC Indian Telecommunications Engineering Center, starting from October 1, 2019, all telecommunications products, as long as they are produced, imported, distributed or sold in the Indian market, need to pass before this. TEC certified. Whether the basic information of TEC certification is mandatory: Yes Whether a local representative is required: Yes Whether a local test is required: Yes Issuing agency: TEC TEC certification mark The relationship between TEC certification, BIS certification and WPC certification TEC: is the Indian Telecom Engineering Center, the full name is Telecommunication Engineering Center, TEC certification controls network communication products. BIS: is the Bureau of Indian Standards, the full name of The Bureau of Indian Standards, BIS certification controls safety regulations. WPC: It is an organization that controls wireless regulations in India. The full name is Wireless Planning and Coordination Wing. WPC certification controls radio products. Applicable product scopeA communication or network device that interfaces with a public network or wide area network (WAN) service. Common telecom network interfaces include T1/E1, ISDN BRI, PRI ISDN, ADSL, serial and analog PSTN, and more. TEC Certification Schemes: · Generic Certification Scheme (GCS) - Applications must be supported by test reports certifying the ER · Simplified Certification Scheme (SCS) - Applications display test results where necessary and include a Supplier Integrity Statement (SDoC). Product categories controlled by TEC certification (including certification scheme categories) Administrative telephone system - SCS NSD/ISD public telephone - SCS electronic telephone equipment - SCS main telephone system - SCS 2-line feature phone - SCS coin box telephone - SCS PSTN Terminals - SCS CLIP Phones - SCS Audio Conferencing Equipment - SCS Multi-Line Telephone Systems - SCS Group 3 Fax Machines - SCS Modems - SCS Cordless Telephones - SCS POS Terminals - GCS GPON Equipment - GCS DSL Equipment - GCS IoT Gateways - GCS Tracking Devices-GCS Smart Meter-GCS Smart Watch -GCS Smart Security Camera -GCS Router -GCS LAN Switch-GCS Mobile Phone and Dongle -GCS Mobile BTS-GCS Compact Cellular Network -GCS Mobile Repeater -GCS Microwave Communication Equipment- GCS UHF/VHF Communication Equipment-GCS Mobile Radio Trunking System Equipment -GCS Equipment Operating at 2.4 GHz and 5 GHz-GCS Satellite System Equipment -GCS IP Terminal -GCS Media Gateway -GCS Signaling Gateway-GCS Session Border Controller-GCS Software Switches -GCS ISDN CPE-GCS Switches -GCS Telephony Application Servers -GCS Telephony Media Servers -GCS Multiplexing Equipment-GCS SDH Equipment-GCS DWDM Equipment-GCS Digital Cross-Connectors-GCS TEC Certified ClassificationCertified Sub-Interface Approval and Type Approval 2 class. 1. The Interface Approval is based on the Interface Requirements (IR) standards issued by the TEC. 2. Type Approval is based on the Generic Requirements (GR) standards issued by TEC. Testing requirements· Security requirements: safety and confidentiality requirements · Technical requirements: technical requirements · Safety: safety · EMI/EMC: electromagnetic interference, electromagnetic compatibility · Other requirements: other requirements