Certification IntroductionThe National Telecommunications Commission of the Philippines (NTC), the full name of the National Telecommunications Commission, is responsible for the regulation of wireless and telecommunications services in the Philippines. All wireless and telecommunications products entering the Philippine market must obtain Philippine NTC certification.Basic information of NTC certification in the PhilippinesCertification Category: Compulsory CertificationSample request: N/ALocal testing: N/AWhether factory inspection: NOLocal Representative: RequiredThe application period takes approximately 3-4 weeksCertification classificationNTC certification is divided into two ways: Type Approval and Type Acceptance: 1. Type Approval is aimed at telecommunication products such as telephones and fax machines. 2. Type Acceptance for wireless products. NTC accepts CE, FCC, IC, C-tick and other standard EMC&RF&TELECOM test reports and obtains CB or NB approval safety report. Applicable product scopeNTC certification is a wireless certification in the Philippines. For telecommunications equipment and telecommunications terminal equipment, the existing mandatory specifications for mobile communication products have been extended to wireless related products. application process1. Fill in the application form and authorization letter 2. The customer signs back the authorization letter and submits the relevant test report 3. Submits the official application 4. Official audit and sends an audit email to the laboratory for issuing the report 5. Issue the certificate

Certification IntroductionPhilippine ICC certification was issued by the Bureau of Product Standards (BPS) of the Department of Trade and Industry of the Philippines on August 17, 2007. The 2007 series of executive orders issued by the Philippine National Standards for audio, video and similar electrical appliances are mandatory. The ICC system applies to imported goods. For imported products that are covered by the mandatory Philippine National Standard (PNS), after the imported goods are evaluated by the Philippine Bureau of Product Standards (BPS) and meet the requirements of the corresponding Philippine National Standard or the internationally accepted foreign standard, BPS will give the product to the product. The importer of ICC issues an ICC license, allowing it to apply the ICC mark. Imported products are subject to sampling testing. In addition, the Philippine Sea will conduct random sampling inspections in the market to ensure that imported goods meet the corresponding PS standard requirements. The need for ICC certification1. Benefits to Manufacturersa. Enhance the competitiveness of products in domestic and international markets;b. Improve the company's sales and increase profits. 2. Benefits for tradersa. Improve the reputation of the trader, who will be seen as a source of high quality products;b. Attract buyers who focus on product quality;c. Increase buyer confidence in the product, thereby increasing sales. Applicable product scopeThe Philippines implements compulsory certification for 85 product series that have an impact on health and life safety and have a negative impact on the environment during use, including: electrical equipment/products, household appliances, building materials, safety matches, fire extinguishers, automobiles, petroleum products, gas Sol, etc. ICC Compulsory Certification List 1. Household appliances (air conditioners, electric fans, immersion water heaters, kitchen appliances (mixers, egg beaters, etc.) refrigerators, washing machines, etc.) 2. Lamps and related products (fluorescent lamps, incandescent lamps, lamp holders, Christmas lights /light string, starter, etc.) 3. Wiring device (circuit breaker, metal wire junction box, plug and socket, PVC tape, switch) 4. Wire and cable (PVC flexible wire, thermoplastic wire and cable) 5. Machinery/building materials (cement , steel pipes, ceramic tiles, iron sheets, flat glass, water pipes, pipe fittings, urinals, bathtubs, water tanks, washbasins, iron wires) 6. Chemical and other products (fire extinguishers, lighters, single-piece chairs/stools, brake fluid, gas stoves , Vehicle inner tubes, lead-acid batteries, matches, seat belts (seat belts) (windshields, rear lights, side seats, car tires)

Certification IntroductionThe Singapore Infocomm Media Development Authority (IMDA) is a merger of the former Singapore Infocomm Development Authority IDA and the Singapore Media Development Authority MDA. Wireless products entering the Singapore market need to be certified by Singapore IMDA. Basic information of IMDA certification in SingaporeCertification Category: Compulsory CertificationSample request: N/ALocal testing: N/AWhether factory inspection: no needLocal Representative: RequiredCertificate validity: 3 years It takes about 2-3 weeks to apply for IMDA certification in Singapore Applicable product scopeTelecommunications products entering Singapore need to apply for IMDA certification. application process1. Fill in the application form 2. The customer signs back the application form and submits all technical information 3. NTEK pre-review to ensure that it is correct and submit the official application 4. IMDA official review 5. IMDA issues a certificate

Certification IntroductionThe Singapore Consumer Product Protection Regulations 1991 designated the Singapore Standards, Productivity and Innovation Commission as the product safety functional body responsible for licensing and registering products covered by the Consumer Protection (Safety Requirements) Registration Scheme (CPS). Only registered products with the SAFETY logo can be sold in Singapore, and the relevant units responsible for the sale of routinely regulated goods to consumers in Singapore must register each model with the safety authority. At the time of registration, certificates and test reports must confirm that this model complies with the mandatory product safety labeling. Currently Singapore only requires security, while EMC is only voluntary. Safety requirements: Under the requirements of the IEC standard, the product must also meet the tropical condition test, and the Singapore certification must provide a local agent, and the certificate holder is also a local agent. Products can only be sold in Singapore after obtaining PSB. Certification lead timeRegular 3-4 weeks, can be expedited, expedited need to pay extra Other Certification Notes 1. The certificate holder is a local registered company in Singapore; 2. There is no factory inspection and annual fee; 3. The certificate is valid for three years; 4. If the product is a direct plug-in power supply, the plug must meet the relevant requirements, such as European plugs must comply with EN50075, and British plugs must meet the requirements of BS1363 or SS246, and have relevant plug test reports; 5. There is no series of applications for product certification, and each certificate can only cover a single model and one trademark; 6. Valid CB certificate or report, generally do not need to provide samples; 7. Certification standard: IEC standard + Singapore difference, or SS standard;

Certification IntroductionWith the development of trade, buyers and consumers have increasingly higher requirements for product safety and quality. The Malaysian government stipulates that if products are regularly shipped to Malaysia, suppliers need to apply for product certification. In 1998, Malaysia promulgated a new Communications and Multimedia Act (Communications and Multimedia Act 1998), which made detailed regulations on the access conditions of Malaysia's telecommunications services and communications markets. At the same time, a new telecommunications regulatory body, the Malaysian Communications and Multimedia Commission (CMC), was born.According to the "Communications and Multimedia Law", to put communication equipment on the market, it is necessary to apply to CMC or a certification body designated by CMC, carry out type certification, and obtain equipment certification and certification marks. The Communication Equipment Testing Section (CETS) under the jurisdiction of SIRIM is responsible for the specific certification of communication equipment type certification.SIRIM is the only certification management organization in Malaysia. All electronic products entering Malaysia need to apply for SIRIM certification. In principle, the applicant should be a local institution in Malaysia. The application and management of SIRIM certification is specifically responsible for SIRIM QAS International, which issues SIRIM certificates. Malaysia SIRIM certification basic information Compulsory certification sample test requires local testing (only functional verification) The certificate is valid for 5 years and the processing lead time is 3-5 weeks Applicable product scopeCommunication equipment and "Electrical Equipment Approval Regulations" stipulate that the following 31 types of products are subject to mandatory type certification and safety certification respectively: plugs (below 15A), switches and dimmers, sockets (below 15A), fluorescent lamps and starter racks, Ceiling lamp wiring boxes, bayonet lamp sockets and multi-head adapters, fluorescent lamps (excluding separately imported lamps), capacitors for fluorescent lamps, fluorescent lamp ballasts, leakage protectors, electric water heaters (including separately imported heaters), hair dryers, Desk lamps, liquid heating appliances, electric irons, electric shavers, video mixers for kitchens, immersion heaters, hi-fi units, mosquito repellents, bread ovens, electric fans, televisions, vacuum cleaners, players, washing machines, refrigerators , rice cooker, Christmas lights, household power tools, wire and cable.Other products belong to the category of voluntary certification SIRIM certified product scope (general electrical products) communication equipment and "Electrical Equipment Approval Regulations" stipulate that the following 31 types of products must be subject to mandatory type certification and safety certification respectively: plugs (below 15 A), switches and dimmers, sockets (below 15 A), fluorescent lamp sockets and starter racks, ceiling lamp wiring boxes, bayonet lamp sockets and multi-head adapters, fluorescent lamps (except for lamps imported separately), capacitors for fluorescent lamps, fluorescent lamp ballasts, leakage protectors, electric water heaters (including separately imported heaters), hair dryers, desk lamps, liquid heating appliances, electric irons, electric shavers, kitchen food mixers, immersion heaters, hi-fi units, mosquito repellents, bread ovens, electric fans, TVs, vacuum cleaners, players, washing machines, refrigerators, rice cookers, Christmas lights, household electric tools, wires and cables (cross-sectional area 0.5~35 ㎡). Other products belong to the category of voluntary certification. In addition to ordinary home appliances, key components such as plugs, power cords, switches, and LED power supplies also need to obtain SIRIM certification.  The SIRIM certified product scope (wireless products) regulated communications equipment includes: · Calling Subscriber Line Identification Prompt (ACLIP) facility for connection to the PSTN. · Asymmetric Digital Subscriber Line (ADSL) transceivers. · Connect to the Integrated Services Digital Network (ISDN) using Basic Access. · Connect to ISDN using primary rate access. · Cordless telephone systems · Low frequency cables and wires with PVC insulation and PVC jacket. · Overvoltage protection device. · Private Automatic Branch Exchange (PABX) system connected to PSTN. · Terminal equipment connected to the public switched telephone network (PSTN). Controlled wireless equipment includes: · Amateur radio equipment. · GSM mobile terminal. · Land mobile radio equipment. · Broadband Wireless Access (BWA) equipment. · IMT-2000 third generation (3G) cellular mobile terminal. · Short Range Device (SRD) Factory Inspection RequirementsThe first factory inspection must comply with the product certification system. Once it is complied with, a certificate will be issued. The certificate is valid for one year. In order to ensure the renewal of the certificate, the annual inspection must be subject to market supervision; complaints and appeals to NCB should be submitted in writing to SIRIM General Manager of QAS Certification and Inspection Services.

Certification IntroductionThe Indonesian Directorate General of Resources SDPPI (DirektoratJenderal Sumber Daya dan Perangkat Pos danInformatika) is the regulatory body that formulates, plans and implements standardization policies and policies in the field of radio and communication, and has the function of public services, which can issue licenses for radio spectrum, including regulation of radio frequency spectrum Interference and Disturbance, is an organization with wireless/communication testing and certification capabilities, including SDPPI certification for wireless products.Wireless products exported to Indonesia must pass the Indonesian SDPPI type certification and customs inspection. Indonesia's General Directorate of Posts and Telecommunications (DGPT) has enforced since June 2009 to prohibit companies outside Indonesia from being type-approved licensees. Basic information of SDPPI certificationCompulsory certificationControlling unit: Indonesia DGPT requiredLocal representative requiredLocal testing requiredApplication lead time: 6-8 weeks Sample quantity: at least 2 sets Applicable product scopeApplicable products and corresponding relevant regulations1. BT Bluetooth: No.09 / DIRJEN /20042. WLAN Wireless Local Area Network: No. 28 / PERMEN/ 20153. SRD Short Range Radio: No. 214 /DIRJEN / 20054. GSM cellular mobile communication: No.370 /DIRJEN / 20105. WCDMA: No.173 /DIRJEN / 20096. LTE: No. 27 TAHUN 2015 Exemption StatementSDPPI certification special caseProducts eligible for SDPPI exemption mainly include: GPS terminals, servers, network switching equipment, keyless systems, wireless charging equipment, etc.The main information that needs to be provided to us to apply for an exemption letter are:1. Application signed and stamped by the real importer or manufacturer;2. Product manual;3. Photos internal and external photos;4. Label photos;5. User Manual. Waiver Letter Considerations1. The holder of the exemption letter can be the importer, manufacturer or factory, etc., but it is recommended to apply for the relevant exemption letter in the name of the local Indonesian importer;2. The waiver letter is valid for 1 year and needs to be re-applied after it expires;3. It usually takes 1-2 weeks to apply for a waiver letter;4. All the information can be reviewed, no need to submit samples. Other Matters needing attention From September 1, 2014, SDPPI certificate will no longer be divided into A certificate and B certificate. 1. There is no longer A certificate or B certificate; 2. Manufacturers or importers can directly apply for SDPPI certificate; The validity period is three years, but the certificate validity period can only be renewed once (the validity period is increased by three years). After six years, the certificate needs to be extended, and only new applications can be made for products with WLAN and BT functions. Direct prototype testing must be provided. From November 14, 2014, all products with WLAN and BT functions must provide direct prototype testing. The policy of accepting normal prototypes for Bluetooth products has been cancelled.