Certification IntroductionCE is abbreviated from the French "Communate Europpene", which means the European Community, referred to as the European Union. The CE mark is a legally mandatory mark in the EU market. Whether it is a product produced by an enterprise within the EU or a product produced in other countries, in order to circulate freely in the EU market, the CE mark must be affixed to indicate that the product complies with the EU's "New Approach to Technical Harmonization and Standardization" (The New Approach to Standardization). The basic requirements of the technical harmonization and standardization) directive.Those without the CE mark shall not be sold on the market. If the products that have been affixed with the CE mark and entered the market are found to fail to meet the safety requirements, they shall be ordered to be withdrawn from the market. Those who continue to violate the CE mark regulations of the directive will be restricted or prohibited from entering the EU market or forced to withdraw from the market.basic information of CE certification is mandatory: mandatory + self-declaration certificate validity period: no validity period factory inspection requirements: no requirements certificate holder requirements: no requirementsTechnical information: Voltage and frequency AC 230V, 50Hz /60Hz, plug European standard CEE 7/7 & 7/16 or national standard CE Compulsory Certification and CE Self-Declaration InstructionsMost products can be affixed with the CE mark if the manufacturer adopts a self-declaration of conformity; some products with relatively higher risks need to be assessed by a third-party agency authorized by the EU, that is, a Notified Body. Only then can the CE mark be affixed.Applicable areaCE certification can be found in 33 special economic zones in Europe, including: 27 countries in EU, 4 countries in the European Free Trade Zone, and the United Kingdom and Turkey. Products with the CE mark can circulate freely in the European Economic Area (EEA).The specific EU 27 countries list is: Belgium, Bulgaria, Czech Republic, Denmark, Germany, Estonia, Ireland, Greece, Spain, France, Croatia, Italy, Cyprus, Latvia, Lithuania, Luxembourg, Hungary, Malta, Netherlands, Austria, Poland, Portugal, Romania, Slovenia, Slovakia, Finland, Sweden.Applicable product scopeIf you want to understand the product scope of CE, you must understand the NLF regulations of CE certification. NLF stipulates which products within its scope need to be certified by CE. There are currently 22 directives in the new EU legislative framework NLF, which are as follows: 1. Toy safety - Directive 2009/48/EU 2, Mobile Pressure Equipment - Directive 2010/35/EU 3, Restriction of Hazardous Substances in Electrical and Electronic Equipment - Directive 2011/65/EU 4, Construction Products - No. Regulation 305/2011 (EU) 5. Pyrotechnic articles - Directive 2013/29/EU 6. Recreational and personal watercraft - Directive 2013/53/EU 7. Explosives for civil use - Directive 2014/28/EU Directive 8, Simple Pressure Vessels - Directive 2014/29/EU 9, Electromagnetic Compatibility - Directive 2014/30/EU 10, Non-automatic Weighing Instruments - Directive 2014/31/EU 11, Measuring Instruments - Directive 2014/32/EU 12, Lifts - Directive 2014/33/EU 13, Equipment and protective systems for potentially explosive atmospheres - Directive 2014/34/EU 14, Radio equipment - 2014/53 /EU Directive 15, Low Pressure - Directive 2014/35/EU 16, Pressure Equipment - Directive 2014/68/EU 17, Marine Equipment - Directive 2014/90/EU 18, Ropeway Installations - Regulations (EU ) 2016/424 19, Personal Protective Equipment - Regulation 2016/425 20, Gas Appliances - Regulation (EU) 2016/426 21, Medical Devices - Regulation 2017/745 22, In Vitro Diagnostic Medical Devices, Regulation (EU) ) 2017/746 Note: NLF refers to the EU's new legislative framework, the full name "New Legislative Framework" is the EU's regulations to strengthen the market supervision framework and recognition system for products. In 2008, the "New Legislative Framework" was passed to the original New Method Directive. In addition to the unified definition of the relevant concepts in the system, specific provisions are made on national accreditation bodies and accreditation systems, the European Community market supervision framework, product market access control, general rules for the use of signs, and European Community funding. After you are familiar with the regulatory framework, you can classify the corresponding products. The scope of CE certification is very wide. Generally speaking, most products exported to the EU require CE certification. For electronic products and toys exported to Europe, CE certification is mandatory, such as: Power supply: communication power supply, charger, display power supply, LCD power supply, UPS, etc.; lamps and lanterns: chandeliers, track lights, garden lights, portable lights, downlights, light strings, table lamps, grille lights, aquarium lights, street lights, energy saving Lamps, T8 lamps, etc.; Household Appliances: fans, electric kettles, stereos, televisions, mice, vacuum cleaners, etc.; electronics: earplugs, routers, mobile phone batteries, laser pointers, vibrators, etc.; communication products: telephones, Wired telephone wireless main and auxiliary machines, fax machines, answering machines, modems, data interface cards and other communication products. Wireless products: Bluetooth BT products, wireless keyboards, wireless mice, wireless readers, wireless transceivers, wireless microphones, remote controls, wireless network devices, wireless image transmission systems and other low-power wireless products, etc.; wireless communication: 2G mobile phone, 3G mobile phone, 3.5G mobile phone, DECT mobile phone (1.8G, 1.9G frequency band), etc.; Machinery: gasoline engine, electric welding machine, CNC drilling machine, tool grinder, lawn mower, washing equipment, bulldozer, elevator, punching machine , dishwashers, water treatment equipment, gasoline welding machines, printing machinery, woodworking machinery, rotary drilling rigs, lawn mowers, snow blowers, excavators, printing presses, printers, cutting machines, road rollers, trowels, cutting machines Irrigation machines, hair straighteners, food machinery, lawn machines, etc.;Medical equipment and toys, etc. Common electrical and electronic products are:Low Voltage Directive: Household Appliances, IT/AV Products, Lighting Products, etc. Electromagnetic Compatibility Directive: Household Appliances, IT/AV Products, Lighting Products, etc. Mechanical Directive: All Related Products Radio Frequency and Communication Terminal Equipment Directive: Wireless or Communication Terminal Productsapplication process1. The applicant company fills in the application form and provides information, application form, product instruction manual and technical documents. 2. The institution evaluates CE certification inspection standards and CE certification inspection items and quotes. 3. The applicant company confirms the project and sends samples. 5. The laboratory arranges product testing and reviews and evaluates the integrity of technical documents. 6. After the product test meets the requirements, provide the product test report or technical construction document to the applicant company, and issue the CE certificate after the test is passed. 7. The applicant company signs the CE guarantee self-declaration and affixes the CE mark on the product.Application documents1. Name and address of the manufacturer (EU authorized representative (EU authorized agent)), product name, model, etc.; 2. Product instruction manual; 3. Safety design documents (including key structural diagrams, which can reflect the climbing distance, 4. Product technical conditions (or enterprise standards), establish technical data; 5. Product electrical schematic diagram, block diagram and circuit diagram, etc.; 6. List of key components or raw materials (please Select products with European certification marks); 7. Testing Report; 8. Relevant certificates issued by EU authorized certification body NB (for other modes other than Mode A); 9. Product registration certificate in the EU (for Some products such as: Class I medical devices, general IVD in vitro diagnostic medical devices); 10. CE Declaration of Conformity (DOC);Meaningness of CE certification1. The necessity of applying for CE certification, the export of products to Europe must be handled. CE certification is a passport for products to enter the European Union and European Free Trade Zone countries. CE certification means that the product has reached the safety requirements specified in the EU directives; CE certification is a commitment of enterprises to consumers, which increases consumers' trust in products; products bearing the CE mark will reduce sales in the European market. risk. 2. The benefits of applying for CE certification The EU's laws, regulations and harmonized standards are not only numerous, but also very complex in content. Therefore, it is a wise move to obtain the help of an EU-designated agency that saves time and effort and reduces risks; The CE certification certificate of the designated agency can maximize the trust of consumers and market supervision agencies; it can effectively prevent the occurrence of irresponsible allegations; it will become a technical evidence with legal effect.

Certification IntroductionBrazil ANATEL certification is a certification for telecommunications products. All telecommunications products and accessories must obtain ANATEL certification before they can be legally commercialized and used in Brazil.ANATEL certification is divided into mandatory and voluntary certification. The approval process is the same for products in Brazil and abroad. If a product is subject to mandatory certification, the test results and reporting of the product must be consistent with the rules and regulations adopted by ANATEL. Before the product is put into use, it needs to obtain the authorization certificate issued by ANATEL.Basic information of ANATEL certification· Compulsory certification; · Local testing is required; · Local representatives are required; · Type I certificates are valid until cancelled, and the other two types of certificates are valid for two years; · The processing lead time is 8-10 weeks.Compulsory certification categoryThree types of telecommunications equipment require mandatory certification: Type I Terminal equipment connected to the Fixed Switched Telephone Service (FSTS) network through endpoints; Equipment connecting private telecommunications networks to the FSTS network; connected device.Including: mobile phone, satellite phone, VOIP phone, mobile phone battery, mobile phone charging line, phone signal line, modem. Type II · Any equipment that uses radios not covered by Type I, such as low voltage installations, unlicensed equipment and antennas.Includes: TV and radio antennas, receivers, transmitters, wireless network equipment, RF automation equipment. Type III · Any equipment regulated by ANATEL's rules and regulations not covered by Type I or II.Including fiber optic cables, cable connectors, mobile network signal transmitters. Note: Certificate validity: 2 years for Type I, 2 years for Type II, 3 years for Type III.Certification label 1, EAN number 2, certification number issued by Anatel 3, ANATEL logoapplication process1. The customer submits the samples and materials to ITL; 2. The laboratory samples are tested, and the test report is issued after the test is completed. 3. The qualified certification agency reviews the test report and issues the ANATEL certification.Application information1, Information of the applicant for certification2, Information about the manufacturer3, Information of the manufacturing plant4, User Manual 5, Product Manual 6, Technical Specification 7, Internal and External Product Photos 8, Test Report 9, Electrical Scheme 10, ISO9001 Certification of the Manufacturing Plant (for Class I products or if there are multiple manufacturing plants)Certification Notice1. ANATEL currently has no direct certification body in China, and all certification must be done in Brazil; 2. The applicant and holder of ANATEL certification must be a local Brazilian enterprise, which can be a subsidiary of the manufacturer in Brazil, importer, distributor or Authorized agent; 3. User manuals, installation guides and warning signs must be in Portuguese. Other documents can be in English; 4. The product must have an identification plate, including the following information: ANATEL logo certification number (bar code); manufacturer's name; year of manufacture; model; serial number; distributor's registration number. 5. According to the requirements of ANATEL, it is necessary to affix a special label on the battery. The label cannot be printed by the manufacturer, and must be purchased by the local Brazilian seller from the Brazilian official agency.other1. All products in ANATEL's published list require certification; 2. Certificate/authorized holders (importers, manufacturers) must be legally confirmed by Brazil; 3. Type I certificates are valid until cancelled, and the other two types The certificate is valid for two years; 4. The user manual, installation guide and warning signs must be in Portuguese. Other documents can be in English; 5. The product must have an identification plate, which should contain the following information: ANATEL logo certification number (bar code); manufacturer's name; year of manufacture; model; serial number; distributor's registration number.

Certification IntroductionINMETRO is the abbreviation of Brazil's National Institute of Metrology and Industrial Quality, the full name of "The National Institute for Metrology, Standardization and Industrial Quality", responsible for the certification of various product certification bodies (CB). In addition, INMETRO defines various products and their corresponding requirements under this certification scheme. The INMETRO certification under its control covers safety and energy efficiency. INMETRO is not only a mandatory certification mark in Brazil, but also a national certification body in Brazil. developing.INMETRO certification basic informationTechnical information: Voltage frequency AC127V-220V/60Hz, plug ABNT NBR NM 60884-1:2004 Mandatory: Mandatory + Voluntary Certificate Validity: Based on the product, divided into 2 years/3 years/5 years (3 years for home appliances) Factory requirements: first factory inspection + annual review (both for manufacturers and Brazilian buyers) Licensee requirements: need a local agencyApplicable product scopeMany types of products, including electronic medical equipment, household appliances, toys, auto parts, tires and wheels, etc., need to obtain INMETRO certification when entering the Brazilian market.Product certification in Brazil is divided into compulsory certification and voluntary certification.Mandatory categories · Steel pipes · Cast iron pipe accessories · Steel wire rope · Automobile and motorcycle tires, wheels, batteries, shock absorbers, fuel pumps, horns, engine pistons, piston rings, piston pins, circlips, safety glass lights Auto parts · Active medical equipment · Circuit breakers · Live equipment used in explosive atmospheres (explosion proof certification) · Gas system related equipment (reducing valve and rubber hose) · Switches, plugs and sockets · Electronic ballasts · Electric wires and cables · Voltage regulators · Household appliances · IT equipment Voluntary categories:· Industrial valves , · Building materials, etc.Energy efficiency labels:· Three-phase motors · Photovoltaic modules, etc.application process1. The applicant submits the application to the laboratory 2. The laboratory customer service staff accepts the application, and the office issues a test notice. The applicant needs to prepare 3 samples 3. The applicant sends the sample for testing, and the test is qualified, and the laboratory issues a test report 4. Arrange factory inspection, on-site audit (2 Brazilian on-site auditors) 5. If the audit is qualified, an on-site audit report will be issued and submitted to the agency for evaluation6. The report is qualified and the certificate is issued Follow-up surveillance audit: According to Brazilian law, different products have different surveillance audit cycles, generally 6/9/12 months. The process is as follows: Importer Audit Sampling Factory Audit Laboratory Evaluation (if applicable) Witness Test (if applicable) Importer Audit Certification Process Review Update CertificateApplication information1. Test application form 2. Product manual and its operation manual (Portuguese) 3. Electrical schematic diagram 4. List of parts, materials and their manufacturers 5. Specifications of parts and componentsLead timeBrazil INMETRO certification lead time: 1. Some products are more complicated, the process is more cumbersome, and the cycle is long, such as auto parts, car tires, if the whole process is not smooth, it will be difficult to complete a year, even ordinary products, it takes 4 months The above 2. Non-compulsory products, the cycle is about more than 2 months, generally involving factory inspection, it takes more than 4 months

Certification IntroductionArgentina ENACOM certification is a mandatory certification for wireless and telecommunication products. All equipment connected to the public telecommunication network and using the radio frequency band needs to apply for ENACOM certification. For the export of wireless communication products to Argentina, it is required to apply for ENACOM certification. The original control unit of Argentina wireless certification was CNC, which was later changed to AFTIC, and then changed to ENACOM after 2015. Basic information of ENACOM certification Is mandatory certification: Yes Test content: RF Whether factory inspection is required: No Local testing: YESLocal agent is required: YESCertificate validity period: 3 yearsCertification CategoryThere are two types of certificationHomologación (Argentine standard certification) or Codificación (recognized certification where no standard exists).Applicable product scopeTesting is required for the vast majority of telecommunications line termination equipment and radio frequency equipment.· All terminal equipment connected to the public telephone network; · Low power spread spectrum communication products operating in the 2.4–2.4835 GHz frequency band; · Most radio equipment.application process1. Send samples to Argentina for testing 2. No need for factory inspection 3. Certificate holder: Argentine importer 4. One certificate for one model 5. One certificate for one trademark 6. Certificate validity: 3 years7. Certification cycle: 12-14 weeks (calculated from the time the sample arrives in Argentina for laboratory testing and complete documentation) Note: Argentine importers or distributors must complete ENACOM registration to obtain the certificateApplication documents1. Spanish manual 2. Product nameplate 3. Photos inside and outside the product 4. Test software 5. Technical specification 6. Technical data 7. Antenna specification 8. Basic customer information table 9. Argentine importer information (if any) 10. Samples 3 unitsother1. The output power must meet all the following test items: Conducted power: 500mW (PK) Radiated power: EIRP, 43dBm (PK) and 40dBm (AV)Power Density: EIRP, 13dBm/MHz (AV)2. The antenna gain value needs to be adjusted to meet the above output power requirements.3, limited to indoor use. FCC/CE test reports issued by relevant laboratories will be available for certification applications.

Certification IntroductionIRAM was established in 1935. It is a certification body for electronic technology products recognized by OAA (Argentina Accreditation Organization - Argentina Accreditation Organization) and a certification body for compulsory certification products recognized by the government. The IRAM Safety Mark is a mandatory (except exempted) certification mark in Argentina.Basic information of S-MARK certificationTechnical information: voltage frequency AC220V/50Hz, plug IRAM 2073/ IRAM 2063:2009 /IRAM 2063:2009 is mandatory: Mandatory certificate validity period: no validity period, annual review maintains validity Factory inspection requirements: for logo certification, the first factory inspection is required + Annual review certificate holder requirements: no requirementsApplicable product scopeThe Argentine government passed two new resolutions 197/2004 and 198/2004. 197/2004 allowed manufacturers and importers to choose different certification systems. The Argentine authorities revised the certification system at the end of 2004 and published Resolution 197/2004. , and put this plan into practice. Resolution 197/2004 applies to the following products: electronic and electrical products, toys, personal protective equipment.Certification CategoryElectrical appliances applicants can choose any of the following certification methods:Type A: mark certificationType B: ApprovalType C: batch certificationWhile 198/2004 has compulsory certification requirements for some electrical and electronic products, the agreement 198/2004 stipulates that the following products are no longer included in the scope of compulsory certification:- Products with rated current greater than 63A- The rated voltage is less than 50V, using battery power- Rated electrical power less than 50V with external power supply (including battery operation) In addition, the following requirements must also be met:- The power supply must have a valid Argentine certification- The technical parameters of the adaptable power supply or the model of the adaptable power supply must be marked in the product manual- The product manual must indicate that it is dangerous to use a non-specified power supply However, products below 50V are still subject to mandatory certification requirements:- Use lighting and lighting supply system on mains 50V AC-Dichroic lamps and lamp holders-Hand-held power tools- Electric fence starter-Electronic muscle stimulator for fitnessapplication process1. Fill in the application form 2. Issue the report according to the IEC standard or IRAM standard 3. Provide the difference certificate that meets the Argentine country, such as the difference report 4. Sample identification 5. List Argentina certified importers and exporters 6. Trademark registration 7. In public business Registered company name 8. signed procedural rules 9. factory inspection report (once a year)Application information1. Safety test report CB test report plus CB certificate, or IEC test report in English plus Argentina's national requirements 2. Additional files Application form, importer's authorization letter, design drawings, specifications, circuit diagrams, product photos Safety warnings in Spanish, user manual in Spanish, factory inspection report, the plug certificate conforms to the Argentine IRAM 2063/2073 standard (if the plug does not conform to the Argentine IRAM standard, additional specifications and samples of the power plug are required)Certification cycle4-8 weeks

Certification IntroductionSUBTEL (Subsecretaria de Telecomunicaciones) is Chile's telecommunications regulator, and products involving radio frequency, cellular or satellite technology require approval and certification for commercialization in Chile.SUBTEL Certification Basic Information Certification Nature: Mandatory Factory Inspection: No Local Test: Need Local Representative: Need Certificate Validity Period: Long-term Valid Certification Mark Requirements: NoneApplicable product scopePortable transceivers, remote controls, wireless microphones, wireless telephones, radio frequency identification (RFID) devices, radio alarms, medical communication system implementations (MICS), medical application equipment, vehicle radar system equipment, and any wireless technology (Bluetooth, Wi-Fi , RFID, etc.) such as printers, keyboards, computer mice and touchpads. If the equipment can be classified into these technical categories, a certificate of certification will be issued after obtaining a certificate of conformity from a registered testing agency in Chile. If the device cannot fall into these categories, the manufacturer must obtain a "special authorization" from SUBTEL to commercialize the device.Application documents1, Application Form 2, Safety Test Report 3, EMC Test Report 4, Trademark Registration Certificate 5, Risk Assessment Report 6, Electronic and Mechanical Schematic 7, English and Arabic Instructions 8, Product Photos 9, Nameplate Photos 10, Similar Models Statement 11, manufacturer ISO9001 and business license